do not scale from this print unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] tolerances do not apply to reference dimensions. 6qdps-xxx-xx.x-xxx-xxx-x-x no of positions -016, -032, -048, -064 (per row) length -xx.x (inches) (03.7[95.3] min) (see note 2) (see note 9) first end -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 2) -teu: terminal, edge mount, up -ted: terminal, edge mount, down (see table 5 & sheet 4) second end wiring option -1: pin 1 to pin 1 -2: pin 1 to pin 2 -3: pin 1 to pin n-1 -4: pin 1 to pin n (see table 9, sheet 6) -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 3) -teu: terminal, edge mount, up -ted: terminal, edge mount, down (see table 5 & sheet 4) -f: screw option first end only -s: screw option second end only -b: screw option both ends -n: no caps (see fig. 3, sheet 5 for edge mount end options) (see fig. 4, sheet 5 for double vertical end options) (see fig. 5, sheet 5 for no caps options) (leave blank for standard caps both ends) end option length: xx.x + "l" ref (see table 4) .570 14.49 ref (typ) .845 21.47 ref (typ) "a" ref (typ) "b" ref (typ) length: xx.x 01% 'a' sub-6qdps-x-xxx-xx-xx c1 n (see table 3) n-1 (see table 3) n (see table 3) n-1 (see table 3) sub-6qdps-x-xxx-xx-xx 01 02 01 sts-01 (tighten to 1.4 - 1.7 in-lbs) (4 plcs) 02 first end second end .294 ref (typ) 7.47 * "c" ref this product manufactured with lead-free processing pb qdp-xx-01 qdp-xx-02 sub-ttf-30100-08-01-xx.xx (see table 1 for qty) length ref detail 'a' scale 2.5 : 1 hdrl-11 (see note 5) (see note 7) c c3 c2 * -dv end options only vertical (6qdps-032-xx.x-str-str-1 shown) fig. 1 sheet of material: .635mm high-speed twin-ax cable assembly by: 6qdps-xxx-xx.x-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/10/03 6 1 sheet scale: 1.25:1 f:\dwg\misc\mktg\6qdps-xxx-xx.x-xxx-xxx-x-x-mkt.slddrw notes: 1. represents a critical dimension. 2. sub-ttf length is equal to 6qdps length. 3. all assemblies to be 100% electrically tested for shorts and opens. 4. all assemblies to be 100% hi-pot tested at 300v. 5. top sub-ttf not shown in this view for clarity; hdrl-11 to be centered on lower sub-ttf as shown; hdrl-11 is to contain part number, shop number, line number & date code. 6. package assemblies in static dissipation bags. 7. these terminals are not considered in the number of positions in the callout because they are grounded. 8. parts to be processed per samtec acceptability requirements: hdr-pi-01 "cable workmanship standards". 9. cable lengths longer than 40.00 inches are not supported by s.i. test data. revision f
n-1 n t16 t1 1 2 t b t1 t16 1 2 n n-1 t b n-1 n b1 b16 1 2 t b b16 b1 1 2 n n-1 t b 1 2 t16 t1 n-1 n t b t1 t16 n-1 n 2 1 t b 1 2 b1 b16 n-1 n t b b16 b1 n-1 n 2 1 t b first end - vertical (see table 9, sheet 6) -ttl -ttr -stl -str -tbl -tbr -sbl -sbr sheet of .635mm high-speed twin-ax cable assembly by: 6qdps-xxx-xx.x-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/10/03 6 2 sheet scale: 1.25:1 revision f f:\dwg\misc\mktg\6qdps-xxx-xx.x-xxx-xxx-x-x-mkt.slddrw
n-1 n t1 t16 1 2 t b t16 t1 1 2 n n-1 t b n-1 n b16 b1 1 2 t b b1 b16 1 2 n n-1 t b 1 2 t1 t16 n-1 n t b t16 t1 n-1 n 2 1 t b 1 2 b16 b1 n-1 n t b b1 b16 n-1 n 2 1 t b second end - vertical (see table 9, sheet 6) -sbl -sbr -stl -str -ttl -ttr -tbl -tbr sheet of .635mm high-speed twin-ax cable assembly by: 6qdps-xxx-xx.x-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/10/03 6 3 sheet scale: 1.25:1 revision f f:\dwg\misc\mktg\6qdps-xxx-xx.x-xxx-xxx-x-x-mkt.slddrw
t1 t16 b t n n-1 1 2 n n-1 1 2 b1 b16 b t n n-1 1 2 t16 t1 b t n n-1 1 2 b1 b16 b t "e" ref "d" ref length: xx.x + "l" ref (see table 4, sheet 1) qdp-xx-03 (typ) .422 10.72 ref sub-6qdps-x-xxx-03-xx first end - edge mount (see table 9, sheet 6) second end - edge mount (see table 9, sheet 6) -ted -teu -ted -teu edge mount (no captive panel screws) (6qdps-016-xx.x-teu-stl-x shown) (same as fig. 1, unless otherwise stated) fig. 2 f sheet of .635mm high-speed twin-ax cable assembly by: 6qdps-xxx-xx.x-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/10/03 6 4 sheet scale: 1:1 revision f f:\dwg\misc\mktg\6qdps-xxx-xx.x-xxx-xxx-x-x-mkt.slddrw
"f" ref "g" ref .500 12.70 ref (typ) (fully tightened) "h" ref cps-4-40-01-x (typ) qdp-xx-03-cps (typ) f "k" ref "j" ref .140 3.56 ref (typ) .296 7.52 (typ) qdp-xx-02-sdo qdp-xx-01 f "l" ref .220 5.59 ref (see table 9) "m" (see table 9) "n" fig. 5 (6qdps-016-xx.x-teu-stl-n shown) (same as fig. 1, unless otherwise stated) sub-6qdpx-x-xxx-xx-xx sub-6qdpx-x-xxx-03-xx sub-ttf-30100-xx-xx-xx.xx apply uv epoxy to all cable ends (height not to exceed .089[2.26] above pcb surface) double vertical (with screw down option) (6qdps-016-xx.x-str-xxx-1-f shown) (same as fig. 1, unless otherwise stated) fig. 4 edge mount (with captive panel screws) (6qdps-016-xx.x-teu-xxx-1-f shown) (same as fig. 2, unless otherwise stated) fig. 3 sheet of .635mm high-speed twin-ax cable assembly by: 6qdps-xxx-xx.x-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/10/03 6 5 sheet scale: 1.25:1 revision f f:\dwg\misc\mktg\6qdps-xxx-xx.x-xxx-xxx-x-x-mkt.slddrw
sheet of .635mm high-speed twin-ax cable assembly by: 6qdps-xxx-xx.x-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/10/03 6 6 sheet scale: 1.25:1 revision f f:\dwg\misc\mktg\6qdps-xxx-xx.x-xxx-xxx-x-x-mkt.slddrw
|
